PE corrugated drainage pipes ID - Peštan

PE corrugated drainage pipes ID

Excess water in the soil can cause serious problems on land and objects until their complete destruction in landslides and in a very short period of time. Therefore, the proper drainage of the terrain is extremely important to consider during design and preparing the ground for construction. Having regard to consideration the need for drainage of excess water out of the soil Peštan in its production program included corrugated drainage and polyethylene (PE) pipe for drainage excess water out of the soil of a large range of diameters in accordance with DIN 4262/1. These pipes thanks to its large hydraulic capacity and a wide range of diameters offered fully capable to respond to any request to provide reliable and long-term drainage field.

  • Products
  • Program
  • Technical
  • Reference
  • Tutorials
  • Download
  • PE CORRUGATED DRAINAGE ID PIPE

  • Peštan polyethylene corrugated drainage pipes are made of standard PE corrugated pipes and can be created and defined also of the pipe with outside (OD) diameter  and defined by the inner tube (ID) diameter, enabling optimal selection of diameters and hydraulic capacity. PE OD pipes up to a diameter of 200 mm are made in the process directly on the line. Pipes larger than that ID or pipes which are made subsequent to the processing of semi-automatic machines.

    Drainage corrugated PE pipes are available in the following diameters: Ø ID 140, Ø ID 200, Ø ID 250, Ø ID 300, Ø ID 400, Ø ID 500, Ø ID 600, Ø ID 800.

    All diameters can be created in classes of ring stiffness  SN 4 or SN 8. This range of ring stiffness allows optimum selection of tubes in accordance with the static calculation. For program PE corrugated drainage pipes we manufacture the necessary fittings and we offer a full program of supporting shafts in all standard in dimensions so that we are able to help in one place and offer a complete pipe drainage systems for high performances.

  • Peštan polyethylene (PE) corrugated drainage pipes intended for the construction of a pipeline dedicated gravity drain excess water from the soil. The pipes are perforated in accordance with DIN 4262/1. In accordance with this standard, the total area of the slot for receiving water is higher than 50 cm² / m, and pipes can be completely perforated by volume or 2/3 perforated.  The slots are located between the ribs pipe symmetrically in volume over the length of the tube which allows not obstructed access of water to the slit. During the construction of drainage systems is recommended to pipe except the stone filter layer placed in an additional protective layer of geotextile filter to prevent leaching of the soil and the possible blocking of the hole on the tube by impurities and therefore reduced efficiency of the pipeline.

    PE corrugated drainage pipes ID 2

    Buyer in accordance with their needs can choose a circumferential stiffness (strength ring) pipe that can be SN 4 (4 KN/m²) or SN 8 (8 KN/m²). With this program, we offer a complete pipe manhole manufactured of our pipes or roto casting technique as well as fitting program so that we can meet all customer requirements regardless of how the project was complex. For any questions or to create dedicated solutions for the project you can contact our technical support.

polygons