Hirro DRIP

With hotter summers crop irrigation is becoming a necessary precondition for any serious production. Therefore, we have introduced our production pipes for irrigation drip system. This system was developed with the intention of securing food production in desert conditions but thanks to its superior characteristics is accepted in all climate zones. These pipes provide reliable and steady bringing water directly to the root zone of plants with accurate dosing and minimal water consumption. Since each liter of water brought to the plant costs, these systems provide multiple savings to users:

Less water consumption means to irrigate a larger area of the same amount of water available
Less water consumption means less energy bills at the pump
Bringing water directly to the root zone of the plants that grow means slower development of weeds that receives less water than alternative systems
The possibility of bringing fertilizers, pesticides and herbicides through the system reduces the need for using machinery

HIRRO DRIP pipe in thickness from – 0.15 mm, 0.20 mm, 0.25 mm and 0.30 mm are intended for use in the course of one season, after which the pipes are removing from the field for processing land and pipes with a diameter of 0.9 mm it is intended for long-term use in orchards.

Control the flow is realized through driper that is specifically manufactured and welded to the inside of the pipe. This driper is wearing part for water filtration, a labyrinth for flow control and part of the water spout. The outer tube is precision laser-drilled in a designated place. The pipes are made and controlled in accordance with EN ISO 9261: 2011.

With the program HDPE water pipes that are used for irrigation and with fitting for irrigation, Peštan is able to offer a complete irrigation system.

  • Products
  • Program
  • Technical
  • Reference
  • Tutorials
  • Download
  • Hirro Drip

  • Hirro DRIP pipes for drip irrigation are produced only in diameter of 16 mm. The buyers, depending on their needs can choose between four different wall thicknesses – 0.15 mm, 0.20 mm, 0.25 mm, 0.30 mm and 0.90 mm. Also it is possible to choose desired flow rate of water through a dripper and distance between drippers. For more information on the selection of pipe and adjusting the amount of water delivered to the plants, please check out our catalog or technical part of this site or you can consult our technical support.

  • Peštan HIRRO drip irrigation pipes allow a serious and professional approach to the problem of irrigation plants. In terms of industrial food production, it is necessary complete system of irrigation project that takes all details such as, for example:

    Need of water of grown culture
    Type of land that is irrigated
    Sun exposure
    Slope

    For its part Peštan allows you to adjust the flow of water through a dripper with combination of the following factors:

    Operating pressure in the pipe
    Flow individual dripper at a given pressure
    Distance between drippers

    For customers are available flow rates of 1.1l/h, 1.6l/h and 2.3l/h by dripper at a working pressure of 0.7 bar. By changing the operating pressure it is possible to realize additional variations in flow. In addition it is possible to choose the distance between drippers from 20 cm, 30 cm, 40 cm, 50 cm or 60 cm between two drippers. This allows a huge number of combinations of flow so that it can be choose pipe for every situation.

polygons